simg_2542 (1)
limg_4963limg_4964limg_4965limg_4966limg_4967

Anti Slip Decking Strips Ideal For Commercial And Domestic Slippery Decking Walkways Ramps And Paths

£4.99£22.49

Clear selection
SKU: Anti Slip Decking Strips Ideal For Commercial And Domestic Slippery Decking Walkways Ramps And Paths. Category: .

Product Description

Anti Slip Decking Strips Ideal For Commercial And Domestic Slippery Decking Walkways Ramps And Paths

Can be installed onto Slippery Wood Decking, Concrete and Steel using either screws or fixing adhesive, in some cases you may wish to use both for a secure, watertight long lasting solution.

Anti Slip Decking Strips are manufactured from Fibreglass (Glass Reinforced Plastic or GRP), with a durable and hard-wearing angular quartz grit resin bonded to the top surface.

TOP 10 BENEFITS:

  1. Easy to Install – Simply Glue, Screw Fix or both
    2.Ideal for Commercial or Domestic Decking
    3. Exceptional ANTI-SLIP Properties
    4. Low Profile (4mm Thick) With Chamfered Edges
    5. Each Strip 50 mm Wide
    6. Moss & Algae Resistant
    7. Thermally Stable (Resistant to Frost & The occasional summer heat-wave)
    8. Assists Conformance with DDA (Disability Discrimination Act) Legislation
    9. Corrosion Resistant
    10. Available in Yellow, Beige or Black

Design:

Our Decking strips have been designed to Sit on Top of your existing timber decking, and they have a Ramped / Chamfered edges on both edges to remove any potential trip hazards.

Convex Decking Strips are ideal for:

Bridges, Garden Decking, Piers & Pontoons, Platforms, Steps, Disabled Access Ramps, Fishing Platforms, Caravan Access Platforms, & Balconies.

Choice of Sizes & Colours:

The strips are 50 mm wide, and available in a variety of colours and sizes. If your required size is not listed, simply order the next largest size and we can trim them down to the exact size that you require. When ordering simply add your required “cut size” to the “notes” section of the order, and we will ensure you receive the size that you require.

Easy To Install:

The strips are easy to fit, simply glue into place using a good quality PU Adhesive such as “No-Nails” or “Web-Fix” and screw them onto the surface of your timber decking significantly reducing the risk of slips occurring. All strips are supplied with Reisser R2 Cutter Screws, which overcome the need to pre-drill the decking strips. Simply drive the screws into the decking strip using a powered screwdriver and the screws will penetrate the fibreglass strip and self-countersink themselves into the surface to provide a sub-flush finish. Your Free installation guide will be emailed to you once your payment is received.

Additional Information

Size

Beige – L 1000mm x W 50mm, Beige – L 1200mm x W 50mm, Beige – L 1500mm x W 50mm, Beige – L 1800mm x W 50mm, Beige – L 2000mm x W 50mm, Beige – L 3000mm x W 50mm, Beige – L 3600mm x W 50mm, Beige – L 600mm x W 50mm, Beige – L 750mm x W 50mm, Beige – L 900mm x W 50mm, Black – L 1000mm x W 50mm, Black – L 1200mm x W 50mm, Black – L 1500mm x W 50mm, Black – L 1800mm x W 50mm, Black – L 2000mm x W 50mm, Black – L 3000mm x W 50mm, Black – L 3600mm x W 50mm, Black – L 600mm x W 50mm, Black – L 750mm x W 50mm, Black – L 900mm x W 50mm, Brown – L 1000mm x W 50mm, Brown – L 1200mm x W 50mm, Brown – L 1500mm x W 50mm, Brown – L 1800mm x W 50mm, Brown – L 2000mm x W 50mm, Brown – L 3000mm x W 50mm, Brown – L 3600mm x W 50mm, Brown – L 600mm x W 50mm, Brown – L 750mm x W 50mm, Brown – L 900mm x W 50mm, Yellow – L 1000mm x W 50mm, Yellow – L 1200mm x W 50mm, Yellow – L 1500mm x W 50mm, Yellow – L 1800mm x W 50mm, Yellow – L 2000mm x W 50mm, Yellow – L 3000mm x W 50mm, Yellow – L 3600mm x W 50mm, Yellow – L 600mm x W 50mm, Yellow – L 750mm x W 50mm, Yellow – L 900mm x W 50mm